Product Guides
Instruction Manual
Download the guide for your LumiPet version, or browse the how-to answers below.
LumiPet w/ Remote
For standard LumiPets that include a remote control for adjusting brightness, setting sleep timers, and locking colors.
Download PDFLumiPets Junior
For compact LumiPets Junior models. Same great features in a smaller size. Download the guide specific to your Junior LumiPet.
Download PDFBluetooth LumiPet
For LumiPets with Bluetooth connectivity. Includes pairing instructions, app setup, and a full feature overview.
Download PDFLumiClock
Complete setup guide for your LumiClock bunny alarm clock. Covers time setting, alarm modes, funny faces, and light colors.
Download PDFSound Soother
For LumiPets Sound Soother models. Covers white noise modes, lullaby functions, volume control, and light settings.
Download PDFHow-To Answers
Common How-To Questions
Quick answers to the most common setup and usage questions. For full step-by-step instructions, download the manual for your version above.
🐾 LumiPets
Select your desired color or color mode using the remote, then press the power button on the light base once. The tap feature will be disabled and the color stays locked. The lock resets when you select a new setting on the remote or turn the LumiPet off.
Remote version: 9 individual glowing colors, slow flow mode (smooth color cycle), and blink mode.
Basic tap version: Dim white, bright white, slow flow color cycle, and blink mode. Tap the body to cycle through each.
Basic tap version: Dim white, bright white, slow flow color cycle, and blink mode. Tap the body to cycle through each.
- Make sure the plastic battery tab has been removed from the remote.
- Confirm the power switch on the bottom of the LumiPet is turned ON.
- If still not working, replace the remote battery (CR2025 coin cell).
- Remember: the remote cannot turn the LumiPet on -- the base power button must be pressed first.
Use a standard 5v/500ma USB adapter. Avoid fast chargers -- they can reduce battery longevity over time. Any standard USB wall adapter or computer USB port works well.
Yes, LumiPets can be used while plugged in and charging. For best battery health, occasionally let the battery fully drain and recharge rather than always leaving it plugged in.
Turn the main switch on the bottom to OFF, wait 10 seconds, then turn it back ON. If the battery is fully drained, charge for at least 30 minutes before turning on again.
🕐 LumiClock
Lightly tap the alarm clock to switch between cute faces and funny sounds. Each tap cycles to the next expression.
Yes -- the LumiClock has 8 alarm sounds to choose from. Refer to your instruction manual PDF above for the button sequence to cycle through sounds.
Can't find what you need?
Our support team is happy to walk you through anything. Reach out anytime.
Contact Us